What pool resurfacing actually is
Every concrete pool in Florida has a waterproof interior finish over a concrete (gunite) shell. That finish is what keeps water in, keeps the surface smooth on your feet, and gives the water its color. Sun, chemistry and time slowly break it down. Resurfacing removes the worn finish and applies a new one.
Most Bradenton pools need it every 10 to 15 years with a plaster finish, and less often with quartz or pebble. Waiting too long lets the shell underneath start to absorb water and crack, which turns a resurfacing job into a repair job.
Signs your pool needs it
- Rough or scratchy spots that snag swimsuits or scrape feet.
- Stains that won't brush or chemical out, especially rust-colored or dark blotches.
- Gray patches where the finish has worn thin and the shell shows through.
- Chipping, flaking or hollow-sounding areas (delamination).
- Chalky water and a pool that eats chemicals.
- Visible cracks in the finish, or water loss you can't explain.
Your finish options
There are three main finishes. Plaster (marcite) is the budget choice. Quartz mixes quartz aggregate into the plaster for more durability and color. Pebble uses small stones for the longest life and a textured, natural look. Our finish comparison breaks down cost and lifespan side by side.
How the job usually goes
- Drain the pool safely. Manatee County has a high water table, so the contractor checks groundwater and the hydrostatic relief valve first. A pool drained at the wrong time can lift out of the ground.
- Remove the old finish. Usually chipped out or blasted down to sound material.
- Repair cracks and replace tile or coping if you're doing them.
- Apply a bond coat, then the new finish, usually in one day.
- Refill right away and start up the water. The first 1 to 2 weeks of brushing and balanced chemistry decide how good the finish looks for years.
Plan on the pool being out of use for roughly 1 to 2 weeks total.
What it costs in Bradenton
For a typical residential pool, expect roughly $5,000 to $9,000 for plaster, $7,000 to $12,000 for quartz and $9,000 to $16,000 for pebble. Tile and coping add to that. The cost guide explains what moves the price.
Frequently asked questions
How long does pool resurfacing take?
Most residential resurfacing jobs take about 3 to 7 working days from drain to refill, plus 1 to 2 weeks of start-up brushing and water balancing before the pool is fully ready.
Can I drain my own pool before the contractor comes?
No. In Manatee County's high water table, draining at the wrong time can let groundwater push the pool shell up. Let the contractor handle draining and check the hydrostatic relief valve.
Do I need a permit to resurface a pool?
It depends on your jurisdiction and the scope of work. Your contractor will confirm whether a permit is required for your address and pull it if needed.
Is the estimate really free?
Yes. You'll be connected with a licensed local pool contractor who visits, looks at your pool and gives you a written estimate. There is no cost for the referral and no obligation to hire.
Are you the contractor?
No. Pool Resurfacing Bradenton is a referral service. The contractor you are matched with quotes, contracts and performs the work directly with you.